I have same / similar problem with QGeeM's HC 1202 USB port. Worked reliably under Windows 10 for 2+ years; problem appeared on first restart after installing upgrade to Windows 11. Tried suggestions found online, include one with this issue. The hub's Ethernet port shows no LED activity. No driver updates found by Windows Updates.
Multi Linq Usb 2.0 Driver
i had found the problem was the wireguard vpn drivers crashed into the system networking drivers & registry. fresh re-install the OS and make sure the USB ethernet adapter work first, then installing the wireguard vpn drivers later. it works normally now.
After trying several things such as installing the latest drivers , disableing the hub , removing and re-stating the PC etc , etc. I finally restored all network adapter to factory settings, using the option in the ethernet connections settings page.
I will host these driver packages as long as I can and mirror them if the server load is too high. Yup we hit the $100 AUD per month billing limit for file hosting, the downloads links are now direct links to Google Drive. If you have a question ask here in the comments as other readers may help you.
the driver stk1160.inf is STK1160 ATV BDA WORK PERFECT ON WIN 10 64, IS VERY IMPORTANT DISABLE DRIVER SIGNATURE, use this command bcdedit /set testsigning off after reboot pc force install manual the driver and good job ?
Hi guys,I was never able to get good quality video out of this so I actually gave up on it. I will be looking for a used home DVD recorder to convert my tapes instead but for those who are still interested this is the only driver that worked for my unit:
For updating drivers, there are several ways. You can go to device manger to update the easycap drivers. Use the hardware id to go to pcidatabase.com to find the model and then go to the official site to download the driver.
On Windows 10 Microsoft uses some compatibly drivers for this device dated from 2006. The screen is blurry, after 3 seconds its gone, after 6 seconds the device just freeze. I tried it on several computers too.
I have a ezcap usb 2.0 (USB\VID_1C88&PID_1001&MI_00\7&3723DE77&0&0000)I tried to load the window 10 drives that came with it, that did not work, then I tried to load driver through device manger ,but got an error windows encountered a problem installing the drivers for your device.So I tried toDisable driver signing enforcement, but still had same problemany ideas from anybody
I have the USB\VID_1B71&PID_3002&REV_0100and not sure which drivers I used, I could check if anyone needs it but all I had to do is check the Camera setting in PC Settings and it worked right away
I bought EZCAP 116 TV to transfer my Hi8 home videos to digital on my computer. No problems setting up and copying . Initially worked and editing was good. My computer crashed twice and the editing files on Arcsoft disappeared. I am still able to digitize the files to my computer but saved on Arcsoft for editing. Tried to reinstall but did not work. can I uninstall the drivers and start all over again. Will this allow me edit the files previously digitized. Can you help.
Thank you! After trying for hours to find a working driver, one of these worked.It may also be of worth to note for others that I discovered a much easier solution using an OTG cable with an Android phone or tablet, if that is an option for you.
Thank you so much for the post, the driver EasyCap-W7-W10-x64 work fine for my easy capture.However, the serial number of SW honestech TVR 2.5 does not correct, so I can not use the application.Do you have any update for this?Anyway, thanks a lot for your artical!
Tried these drivers (and several others including the one that came with the hardware):EasycapDC60_STK1160Grabber_32&64bitUSB-AVCPTSetup_For_Win7.zipEasyCap W7 W10 x64.zipDrivers_SMI_Grabber_26012011.zip
hello , i have same issue with you. pls i need the software and drivers. i formated my pc without backup. i recently noticed that i have lost my software disc. you can reply me via email ikechukwuisaac70@gmail.com
Which driver package from the list should I download to use in a windows 10 environment. The driver and software I received with my Easycap capture device, USB DVR Capture v 4.0A Model No:DC60-007 by honestech is totally useless. The software does not allow us to change the video aspect and as a result we end up with a picture that stretches from top to bottom of screen, but is only about 30cm wide when we try to playback on our bigscreen TV.
Husain Al-Badry, (or anyone else that could help!)I have used the driver you found and I now have no issues in the device manager. I have also downloaded and installed Expression Encoder 4, but I could do with some help. I have the Easycap plugged in, how do I get Encoder to recognise or display it? I have a VCR to connect to my Easycap and wish to save a video for later writing to a DVD
I tried to find a solution for my EasyCAP, I tried every driver out there and spend more than 10h to fix the problem. Finally I could find the driver that worked for my EasyCAP (CSL USB2.0 Video Grabber) under Windows 10. Hope it will work for more people who are still struggling with Windows 10.
Buenas tardes, deseo saber si alguien logro encontrar solución para los drivers en Windows 10 ya que nunca pude hacer darlos ya le quite la verificación de firmas y ni aun asi me funciona. Si alguien logra hacerlos dar, por favor suban el link directamente de los drivers que si funcionaron. Muchas Gracias desde ya.
Good day,I also have the same Easier Cap, and it is detected and accessible in Windows 7 64 bit, and named OEM capture. However, there is no sound from the tape, but it records from the microphone. Video is there. Is there another driver to get the sound from yhe VHS tape working?Renate
I have the software you mentioned (Easier Cap DC60-007 usbtv007) and while it does produce both video and audio without problems, there is still an issue with the picture aspect using this driver. There is no selection for 16.9 aspect and as a result I ended up with good audio, but a picture that while it was the correct hieght, but was only 30cm wide. If I change the aspect ratio, then it records audio only and will not record video. I have read from other sights that Easier Cap DC60-007 usbtv007 does not work correctly with anything above windows 2000. It also states within the help file that it is not compatible with Vista, Win7 or 8.
Hi Guys. My Easycap just stop working after last Windows 10 atualization/update, the driver dont work anymore, and in devices mananger it appears with that yellow exclamation. Any one knows how can I fix it?
Forget about my question! The problem was not the drivers, but the latest update on windows 10 (aug 2016). Somehow the update managed to mess up with driver installation. After taking ownership of three folders related to drivers on system32, I was able to get the easycap working.Thanks a lot, anyway!
Hi Gabriel. My Easycap just stop working after last Windows 10 atualization/update, the driver doesnt work anymore, and in devices mananger it appears with that yellow exclamation. Any Do you know how can I fix it? Where have you download this new driver?
hi guys, the driver is working well. but i need the application. i got honestecc in CD. i want to use ulead but when i tried to use the newest corel video studio, thats not supported. can you give me the best application for windows 10?
after many hours of searching i failed to get this to work but a friend help me out he sent me windows 8 drivers for dc60++ OEM Capture Usbtv007this driver works instantly just install and it comes with a software, just chose the Oem capture as the device in the software.already back up all my old VHS tapes.i want to help others so i upload the filelink:
Thank you so much for this article. I used the STK or syntek driver for mine. You are awesome! I have put this file into my drivers folder to save for any future installs of this card. Thanks again! Take care!
Hi,When i plug-in easyCAP, my computer (with windows 10) see it as USB2.0 PC Camera in device manager and assigns a Microsoft driver.Then the system do not allow to change it to any other driver provided within this page. When i remove and replug, same is happening. Please advise how to use easycap drivers instead of automatically assigned Microsoft drivers.
It sounds strange but I can not even make an original drivers published on CD with the hardware mentioned above in a Windows 7 x64 environment working. However, both the EasyCAP (DC60).zip and the EasyCapDC60_64bit.zip drivers work in my case. I do have to say a big Thank You!
The windows 10 driver is a virus according to panda anti virus. For windows 8.1 none of this works I keep getting drivers not for this platform message, and if I let windows update itself I get driver up to date message.
just restart windows and Disable Signed Driver Enforcement. after it up, remove the unknown usb and install the driver. it will ask to restart, and after it up again, the system will recognize your easycap.
I have mine working in i.e. VirtualDub but cannot select default PAL resolution (352288 or 704576) with it. Other programs, like Windows Movie Maker 2012, do not recognize my device at all.I use Windows 8.1 64-bit and native detected Microsoft drivers.
Hi, I have a Easycap 1CH USB DVR for an outside camera. However, the driver that I purchased with this package does not work as Windows 8.1 cannot detect the device driver. Can you PLEASE ASSIST. I tried all the drivers on your website but nothing works.
This page can be used to create a custom driver with information automatically gathered from your system or manually requested. If you already have a UPDD V6 driver license on your system the license will be retained, otherwise a trial version of the driver will be installed. Automatic IdentificationTo identify the touch device connected to your system download and run the USB device identification utility for Windows >7 or MacOS >10.8 systems. 2ff7e9595c
Comments